Cudy M1500 1-Pack AX1500 Dual Band Wi-Fi 6 Mesh System Router

Description

Features & Specifications of Cudy M1500 1-Pack AX1500 Dual Band Wi-Fi 6 Mesh System Router

Features:

1. 1201 Mbps + 300 Mbps Wi-Fi
2. 3× Gigabit Ethernet Ports
3. Connect 60 Devices
4. Parental Controls: URL Blacklist, Time Schedule, Profiles, Client Management
5. Cudy Mesh, VPN Client, Cudy App, Cloud Control

Specifications:

CPU:

1. 1 GHz Single-Core CPU

Memory/Storage:

1. Flash/ROM: 16 MB (128 Mbit) NOR
2. DDR/RAM: 128 MB (1 Gbit) DDR3

Wireless:

1. 5 GHz Wi-Fi Speed: 1201 Mbps
2. 4 GHz Wi-Fi Speed: 300 Mbps
3. 5 GHz Wi-Fi Streams: 2T2R (2×2 MIMO)
4. 4 GHz Wi-Fi Streams: 2T2R (2×2 MIMO)
5. Wi-Fi Antennas: 2× Internal
6. 5 GHz Antenna Gain Max: 5.56dBi
7. 4 GHz Antenna Gain Max: 4.41dBi
8. Range Performance: Max: 170 m (558 ft)
9. Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions.
10. Wall Performance: Two wooden walls with a thickness < 10 cm (4'') | One concrete wall with thickness < 20 cm (7'')
11. Indoor Coverage Reference:
12. Coverage: 1 Pack: 1600 sq ft | 2 Pack: 3200 sq ft | 3 Pack: 4800 sq ft
13. Wi-Fi Standards: Wi-Fi 6
14. Max Wi-Fi Modulation: 1024-QAM
15. Wi-Fi Efficiency: Beamforming
16. Max Capacity: 128
17. Recommended Client Upper Limit: 60
18. Max Wi-Fi Channel Width: 80 MHz
19. Wi-Fi Security: WPA/WPA2/WPA3
20. Guest Network: 2.4 GHz, 5 GHz
21. WPS: True

Interfaces:

1. Gigabit RJ45 Ports: 3
2. Ethernet Notes: 1× WAN port, the rest are LAN ports
3. Uplink Ethernet Ports:
4. 1-Pack: 57×56×26 cm
5. 44×22.05×10.24 inches
6. LED: System
7. Physical Buttons: WPS Button, Reset Button
8. Power Input: DC Jack

Power:

1. Power Adapter: Input: 100 ~ 240 V, 50/60 Hz AC | Output: 12V 1A DC
2. Max Power Consumption (W): 10W

Reliability Environment:

1. Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉)
2. Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
3. Humidity: 10% ~ 90% non-condensing
4. Storage Humidity: 5% ~ 95% non-condensing

Mechanical:

1. Installation: Desktop

General:        

1. Operation Modes: Wi-Fi Router, Access Point, Range Extender, WISP, Client
2. Mesh: Cudy Mesh
3. Mesh Backhaul: Wireless Backhaul, Wired Backhaul
4. Multi-Band Backhaul: True
5. WAN Mode: DHCP, Static IP, PPPOE, PPTP, L2TP
6. Internet Failover Sequence: WAN, WISP

Network:

1. QoS: Per-User Rate Limiting
2. DHCP: Address Reservation, DHCP Client List, Server
3. IP Versions: IPv4/IPv6
4. IPv6 Protocols: Relay, Dynamic (SLAAC/DHCPv6), Static (Fixed IP), Passthrough, 464XLAT, MAP-E, DS-Lite
5. IPTV/VLAN: Bridge, Tag VLAN, VoIP VLAN, IPTV VLAN
6. IGMP: IGMP Proxy, IGMP Snooping
7. Forwarding: Port Forwarding, UPnP, DMZ
8. Firewall: SPI Firewall, Block PING

Utilities:

1. VPN Client: PPTP, L2TP, Wireguard
2. DNS Options: Manual DNS, Rebind Protection, Override Clients' DNS
3. Wake on LAN: True
4. Online Detection: True

Management:

1. Parental Controls: Profile Settings, Offline Time, Online Time, Pause the Internet, Web Filter
2. All Devices Management: Wi-Fi Time Schedule, MAC Filter, IP/MAC Binding
3. Per-Device Management: Internet On/Off, VPN On/Off, Online Time Schedule, Device Rename
4. Content Management: Domain Filter, IP Filter

System:

1. LED Control: True
2. Local Control Method: Config Web Page, App Control
3. Remote Control Method: Config Page via HTTPS, App Control, TR069/TR098/TR111/TR143/TR181
4. Firmware Upgrade: Local Update, App (Over the Air), Online Update
5. Reliability: Timed Reboot, Backup and Restore
6. Diagnostic Tools: Diagnosis, Ping, Traceroute, NSLookup, System Log

Dashboard:

1. Panel: Internet Status, Mesh Status Device Management WAN Status, LAN Status, WISP Status, Wi-Fi Status, VPN Status, DHCP Server Status, System Version
2. Charts: Mesh Topology, Internet Speed, WISP Speed, Wi-Fi Speed