Cudy LT400E - 4G LTE N300 Mbps Cat.4 WiFi Router

Description

Features & Specifications of Cudy LT400E - 4G LTE N300 Mbps Cat.4 WiFi Router

Features:

1. 4G Cat. 4 with Max 150 Mbps DL
2. 300 Mbps Wi-Fi
3. 4× Fast Ethernet Ports
4. 1× Nano SIM Slot
5. VPN Server and Client

Specifications:

CPU: 580 MHZ Single-Core, MIPS24KEC

Memory/Storage:

1. Flash/ROM: 8 MB (64 Mbit ) NOR
2. DDR/RAM: 64 MB (512 Mbit) DDR2

Cellular:

1. Cellular Standards: 4G Cat. 4
2. Cellular Antennas: 2× Internal
3. SIM Options: 1× Nano SIM Slot
4. Available Versions: EU, US, AU
5. Suitable Region: Europe, Middle East, Africa
6. Max DL Speed: 150 Mbps (LTE-FDD), 130 Mbps (LTE-TDD)
7. Max UL Speed: 50 Mbps (LTE-FDD), 30 Mbps (LTE-TDD)
8. Advanced: DL 2×2 MIMO
9. Cellular Bands: LTE-FDD: B1/3/5/7/8/20/28
10. LTE-TDD: B38/40/41
11. WCDMA: B1/5/8
12. US Version Cellular
13. Suitable Region: United States, Canada
14. Max DL Speed: 150 Mbps
15. Max UL Speed: 50 Mbps
16. Advanced: DL 2×2 MIMO
17. Cellular Bands: LTE-FDD: B2/4/5/12/13/14/66/71 | WCDMA: B2/4/5
18. Suitable Region: Latin America, Australia, New Zealand
19. Max DL Speed: 150 Mbps (LTE-FDD), 130 Mbps (LTE-TDD)
20. Max UL Speed: 50 Mbps (LTE-FDD), 30 Mbps (LTE-TDD)
21. Advanced: DL 2×2 MIMO
22. Cellular Bands: LTE-FDD: B1/2/3/4/5/7/8/28/66 | LTE-TDD: B40 |WCDMA: B1/2/4/5/8 | GSM: B2/3/5/8

Wireless:

1. 4 GHz Wi-Fi Speed: 300 Mbps
2. 4 GHz Wi-Fi Streams: 2T2R (2×2 MIMO)
3. Wi-Fi Antennas: 2× Internal
4. Beamforming: True
5. FEM or PA/LNA: 2.4 GHz: 2× Internal
6. Range Performance: Up tp 130 m (427 ft)
7. Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions.
8. Wall Performance: One wooden walls with thickness < 10 cm (4'') | One concrete wall with thickness < 10 cm (4'')
9. Wi-Fi Standards: Wi-Fi 4
10. Max Wi-Fi Modulation: 64-QAM
11. Max Capacity: 64
12. Recommended Client Upper Limit: 30
13. Max Wi-Fi Channel Width: 40 MHz
14. Wi-Fi Security: WPA/WPA2/WPA3
15. Guest Network: 2.4 GHz
16. WPS: True

Interfaces:

1. Physical Buttons: Power On/Off Button, WPS Button, Reset Button
2. 10/100 Mbps RJ45 Ports: 4
3. Ethernet Notes: 1× RJ45 port is WAN/LAN configurable, and the rest are LAN ports
4. LED: System, Internet, Wi-Fi, LAN, WAN/LAN, Cellular Signal Strength
5. Power Input: DC Jack

Power:

1. Power Methods: DC
2. DC Input: 12V 1A
3. Power Adapter:
4. Input: 100 ~ 240 V, 50/60 Hz AC
5. Output: 12V 1A DC
6. Max Power Consumption (W): 8W
7. Idle Power Consumption (W): 4W

Reliability:

1. EMC: ESD: Contact: 4kV; Air: 8kV
2. Environment: Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉)
3. Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
4. Operating Humidity: 10% ~ 90% non-condensing
5. Storage Humidity: 5% ~ 90% non-condensing

Mechanical:

1. Installation: Desktop

General:

1. Operation Modes: Cellular Router, Wi-Fi Router, WISP
2. Cellular APN: Band Select (Band Lock), Cellular Mode Select, Data Roaming, APN Profile, Manual APN Profile, MBN, MTU Value
3. Cellular Mode: 4G Only, Auto
4. WAN Mode: DHCP, Static IP, PPPOE
5. Internet Failover Sequence: WAN, WISP, Cellular

Network:

1. QoS: Per-User Rate Limiting
2. DHCP: Address Reservation, DHCP Client List, Server
3. IP Versions: IPv4/IPv6
4. IPv6 Protocols: Relay, Dynamic (SLAAC/DHCPv6) Static (Fixed IP), Passthrough, 464XLAT, MAP-E, DS-Lite
5. IPTV/VLAN: Bridge, Tag VLAN
6. TTL Customization: Extend, Spoof, Custom
7. IGMP: IGMP Proxy, IGMP Snooping
8. Forwarding: Port Forwarding, Port Triggering, UPnP,DMZ
9. Firewall: - SPI Firewall - DoS Protection - Block PING Application Layer Gateway: - IPSec Passthrough - L2TP Passthrough - PPTP Passthrough - FTP Passthrough - TFTP Passthrough - H323 Passthrough - SIP Passthrough - RTSP Passthrough

Utilities:

1. VPN Server: WireGuard, OpenVPN, Zerotier, PPTP, L2TP
2. VPN Client: WireGuard, OpenVPN, Zerotier, PPTP, L2TP
3. DNS Options: Manual DNS, Rebind Protection, Override Clients' DNS
4. Online Detection: True

Management:

1. Parental Controls: Profiles Settings, Offline Time, Online Time, Pause the Internet, Web Filter
2. All Devices Management: Wi-Fi Time Schedule, MAC Filter, IP/MAC Binding
3. Per-Devices Management: Internet On/Off, VPN On/Off, Online Time Schedule, Device Rename
4. Content Management: Domain Filter, IP Filter

System:

1. Local Control Method: Config Web Page, App Control
2. Remote Control Method: Config Page via HTTP
3. Firmware Upgrade: Local Update
4. Diagnostic Tools: Diagnosis, Ping, Traceroute, NSLookup, System Log
5. Reliability: Timed Reboot, Backup and Restore

Dashboard:

1. Panel: Internet Status, Devices Management, Cellular Status, WAN Status, LAN Status, WISP Status, Wi-Fi Status, VPN Status, DHCP Server Status, System Version
2. Charts: Cellular Speed, Internet Speed, WISP Speed, Wi-Fi Speed